物品名称 规格型号 数量 单位 描述
| 聚氨酯钢丝缠绕管 | DN200*2 | 3.00 | 米 | {"规格":"DN200*2","工作温度":"≤70","工作压力":"-0.1~1","壁厚":"2mm","内径":"Φ200mm","外径":"Φ204mm","参照标准":"GB/T 5567-2013"} |
| 气管 | 8*5mm | 300.00 | 米 | {"型号":"8*5mm","材质":"聚氨酯","内径":"Φ5mm","外径":"Φ8mm","高度":"8mm","颜色":"白色","使用介质":"压缩空气/水/流体","工作压力":"1.0Mpa","参照标准":"GB/T 9574-2017","备注":"1.使用寿命:12个月,环境使用温度:-20℃~50℃\n2.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担。"} |
| 气管 | 6*4mm | 200.00 | 米 | {"型号":"6*4mm","材质":"聚氨酯","内径":"Φ4mm","外径":"Φ6mm","高度":"0mm","颜色":"白色","使用介质":"压缩空气、水","工作压力":"0~1.0Mpa","参照标准":"GB/T 9573-2013","备注":"1.使用寿命:12个月,环境使用温度:-20℃~50℃,标准长度200m/盘\n2.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担。"} |
| 气管 | 10mm | 300.00 | 米 | {"型号":"10mm","材质":"聚氨酯","内径":"Φ6.5mm","外径":"Φ10mm","高度":"1.75mm","颜色":"无要求","使用介质":"压缩空气,水,流体","工作压力":"1Mpa","参照标准":"GB/T 9574-2017","备注":"100盘/米,使用寿命;大于90天.到货验收标准:1.包装完好,内部备件无破碎和损坏.2.型号,参数等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| 高压软管 | 38*1*8 | 4.00 | 个 | {"型号":"38*1*8","材质":"丁腈橡胶+1层普通钢丝","内径":"Φ38mm","外径":"Φ47mm","高度":"0","颜色":"黑","使用介质":"水","工作压力":"8Mpa","参照标准":"GB/T 3683-2011"} |
| 液压缸密封 | ZBD1611-80/45 | 14.00 | 套 | {"规格型号":"ZBD1611-80/45","材质":"聚氨酯，聚四氟乙烯，氟橡胶，丁腈橡胶，碳钢","工作介质":"煤油","特殊要求":"工作压力100bar，可以给厂家提供密封样品","使用寿命":"365天"} |
| 骨架油封 | SBB1030*1070*25+10 | 4.00 | 个 | {"规格型号":"SBB1030*1070*25+10","内径":"Φ1030mm","外径":"Φ1070mm","高度":"25mm","骨架材质":"45#钢","密封材质":"丁腈橡胶","结构形式":"骨架油封","工作温度":"80℃","使用寿命":"730天","参照标准":"GB/T 9877-2008","备注":"1、尺寸：内径为1030mm，外径为1070（+0.18，+0.36）mm，高度为25（±0.6）mm，顶柱高度为10mm，顶柱直径为10mm。2、如图所示密封靠背平均分布8个顶柱材质为45#钢。3、若备件不符合技术要求或出现质量问题则退换货处理，产生的费用由供货商承担。4、满足以上技术要求外，需出具合格证及出厂检测报告，包装完好无损，备件无变形、无破损、无老化裂纹，安装尺寸正确无误。"} |
| 密封圈 | 11*24*25 | 180.00 | 个 | {"规格型号":"11*24*25","内径":"Φ11mm","外径":"Φ24mm","密封圈高度":"25mm","唇口高度":"2.5mm","唇形":"Y型","材质":"氟橡胶","工作温度":"120℃","使用寿命":"180天","参照标准":"GB/T 10708.1-2000","备注":"产品达不到技术要求,由经销商无条件进行退换货处理"} |
| O型圈 | 11.0*3.0 | 40.00 | 个 | {"规格型号":"11.0*3.0","内径":"11","外径":"Φ0","丝径":"3","材质":"FKM","硬度要求":"70邵氏A","工作温度":"90℃","使用寿命":"12月","参照标准":"GB/T 3452.1-2005"} |
| V型圈 | TWVA03250-VDT50/310- | 16.00 | 个 | {"规格型号":"TWVA03250-VDT50/310-335/292*25","内径":"Φ292mm","外径":"Φ310~335mm","密封圈高度":"25mm","唇口高度":"18mm","唇形":"V型","材质":"FKM","工作温度":"90℃","使用寿命":"730天","参照标准":"JB/T 6994-2007","备注":"到货质量不符，退换货处理"} |
| O型密封圈 | 720*6 | 20.00 | 个 | {"规格型号":"720*6","内径":"0","外径":"Φ720mm","丝径":"6mm","材质":"氟橡胶","工作温度":"110℃","使用寿命":"12个月","参照标准":"GB/T3452.1-2005"} |
| 油浸**盘根 | 50*50mm/8.5m | 200.00 | 千克 | {"规格型号":"50*50mm/8.5m","宽度":"50mm","高度":"50mm","材质":"**纤维，浸油","工作温度":"≤350℃","使用寿命":"24个月天","参照标准":"JC/T 1019-2006","备注":"技术要求：介质压力：≤1600Pa。尺寸误差±5mm。用于高温粉尘密封。\n不合格处理：到货时需有出厂合格证，如到货后不符合技术要求或外观破损、变形由供应商无条件进行更换、退货"} |
| 油浸盘根 | 40*35 | 60.00 | 千克 | {"规格型号":"40*35","宽度":"40mm","高度":"35mm","材质":"**浸油","工作温度":"≤200℃","使用寿命":"24个月","参照标准":"JC/T 1019-2006"} |
| 轴瓦油封 | 225mm*255mm*26mm | 12.00 | 个 | {"规格型号":"225mm*255mm*26mm","长度":"0","宽度":"0","高度":"0","材质":"密封环材质为聚酰亚胺，锁紧弹簧材质为碳素弹簧钢","工作温度":"0~100℃","工作介质":"油","特殊要求":"耐磨损、耐高温、耐油上半部及下半部带回油孔且上部有定位销","使用寿命":"≥365天","参照标准":"JB/T 8293-2014","备注":"内径Φ225±0.01mm，外径Φ255mm，厚度26mm\n2、验收标准：如果到货物资不符合技术要求，予以退、换货处理。产品必须有合格证及材质证明"} |
| 精轧马达骨架密封 | 50*72*8 | 50.00 | 个 | {"规格型号":"50*72*8","内径":"Φ50mm","外径":"Φ72mm","高度":"8mm","骨架材质":"低碳钢","密封材质":"丁腈橡胶","结构形式":"丁腈橡胶，内含低碳钢骨架双唇油封，并在唇部装有箍圈式连接的弹簧。","工作温度":"100℃","使用寿命":"365天","参照标准":"GB/T 9877-2008","备注":"来货物资若与技术要求不符和有质量问题,厂家无条件退换货处理,产生费用由供货商承担."} |
| 油封 | 30*47*7 | 4.00 | 个 | {"规格型号":"30*47*7","内径":"Φ0","密封圈高度":"0","材质":"丁晴橡胶","使用寿命":"＞6个月"} |
| 轴瓦油封 | 250mm*280mm*26mm | 10.00 | 个 | {"规格型号":"250mm*280mm*26mm","长度":"250mm","宽度":"280mm","高度":"26mm","材质":"密封环材质为聚酰亚胺，锁紧弹簧材质为碳素弹簧钢","工作温度":"0-100℃","工作介质":"油","特殊要求":"耐磨损、耐高温、耐油上半部及下半部带回油孔且上部有定位销","使用寿命":"≥365天","参照标准":"JB/T 8293-2014","备注":"1、内径（长度）250mm±0.01mm，外径（宽度）280mm，厚度（高度）26mm\n2、验收标准：如果到货物资不符合技术要求，予以退、换货处理。产品必须有合格证及材质证明"} |
| 骨架油封 | TC 280*320*20 | 1.00 | 个 | {"规格型号":"TC 280*320*20","内径":"280mm","外径":"Φ320mm","高度":"20","骨架材质":"低碳钢","密封材质":"丁腈橡胶","结构形式":"双唇口外包胶","工作温度":"≤80","使用寿命":"12月","参照标准":"GB/T 9877-2008"} |
| 骨架油封 | 70*90*12 | 4.00 | 个 | {"规格型号":"70*90*12","内径":"Φ70mm","外径":"Φ90mm","高度":"12mm","骨架材质":"优质碳素结构钢","密封材质":"丁腈橡胶","结构形式":"TC型（带副唇内包骨架型）","工作温度":"-40~+120℃","使用寿命":"≥180天","参照标准":"GB/T 9877-2008","备注":"弹簧材质为65Mn,如到货与技术要求不符,由供应商无条件进行退,换货处理"} |
| 骨架油封 | 70*100*10 | 10.00 | 个 | {"规格型号":"70*100*10","内径":"70mm","外径":"Φ100mm","高度":"10mm"} |
| 骨架油封 | 45*70*12 | 4.00 | 个 | {"规格型号":"45*70*12","内径":"45mm","外径":"Φ70mm","高度":"12mm","骨架材质":"低碳钢","密封材质":"丁腈橡胶双唇油封","结构形式":"双唇油封，并在唇部装有箍圈式连接的弹簧"} |
| 四氟垫片 | DN40-PN16 | 200.00 | 个 | {"规格型号":"DN40-PN16","厚度":"2mm","内径":"Φ0","外径":"0","长度":"0","材质":"聚四氟乙烯","使用寿命":"2年","参照标准":"GB/T 9126-2008"} |
| 橡胶软连接 | DN250*10 | 4.00 | 个 | {"规格":"DN250*10\"","类型":"法兰橡胶软连接","公称直径":"DN250mm","连接形式":"双法兰连接","材质":"天然橡胶(NR),Q235B法兰","工作压力":"1.6MPa","工作温度":"80℃","介质":"水","法兰尺寸":"378mm","使用寿命":"730天","参照标准":"HG/T 2289-2017","备注":"验收要求:不符合技术要求退换货处理."} |
| 缓冲垫 | NOR-MEX-295 | 1.00 | 个 | {"规格型号":"NOR-MEX-295","外径":"φ285±5","内孔直径":"φ185±5","厚度":"65±3","瓣数":"10","材质":"氯磺化乙烯+丁苯胶","使用寿命":"12月","参照标准":"JB/T 10466-2004"} |
| 法兰垫 | 72*65*4.5 | 700.00 | 个 | {"规格型号":"72*65*4.5","材质":"硅胶"} |
| 金属缠绕垫 | DN80-PN16 | 10.00 | 片 | {"规格型号":"DN80-PN16","公称直径":"80mm","公称压力/最高工作压力":"1.6MPa","材质":"金属带：304不锈钢，非金属带：柔性石墨","内径":"99mm","外径":"115mm","厚度":"4.5mm","形式":"基本型","参照标准":"GB/T 4622.3-2007"} |
| 金属缠绕垫 | 276*319 | 200.00 | 个 | {"规格型号":"276*319","材质":"201不锈钢+石墨；金属带材质：205不锈钢，非金属带材质：石墨"} |
| 换热器片密封垫 | NT50T CDS-10 | 200.00 | 套 | {"规格型号":"NT50T CDS-10","长度":"459mm","宽度":"225mm","高度":"3.2mm","材质":"EPDM","工作温度":"80℃","工作介质":"酸碱液","特殊要求":"无","使用寿命":"180天","参照标准":"GB/T 28719-2012"} |
| 高压软管 | 4SP*25*11200 | 2.00 | 根 | {"型号":"4SP*25*11200","材质":"丁腈橡胶+四层钢丝缠绕","接头材质":"Q235","接头尺寸":"M42*2","接头形式":"螺纹","长度":"11200mm","压力":"34.5Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：30mm","参照标准":"JB/T 8727-2017"} |
| 金属软管 | 110*3800 | 1.00 | 根 | {"输送介质":"天然气","规格":"110*3800","材质":"304不锈钢","连接方式":"一端为活动法兰，另一端为固定法兰","被覆层材质":"不锈钢"} |
| 聚氨酯软油石 | 300mm(长)*30(厚)*50(宽) | 10.00 | 条 | {"规格型号":"300mm(长)*30(厚)*50(宽)","材质":"聚氨酯+油石","外径/长度":"300mm","内径/宽度":"50mm","高度":"30mm","结合剂":"不适用","硬度":"不适用","强度":"不适用","线速度":"不适用","最高转速":"不适用","目数":"150","特殊需求":"打磨铝板时油石不会脱落","执行标准":"GB/T 4127.11-2008","备注":"使用寿命:消耗品\n尺寸要求：\n聚氨酯尺寸：300mm(长)*25mm(厚)*50mm(宽)\n油石单块尺寸：50mm(长)*11mm(宽)*5mm(厚)，要求聚氨酯上每块油石间隔1mm\n不合格品处理标准:到货后根据技术要求对来货进行验收,对于不合格品不予验收,进行退换货,退换货期间产生的所有费用由供货商承担."} |
| 机械密封单封 | CZ32-160 | 6.00 | 套 | {"规格型号":"CZ32-160","机封外径":"Φ50mm","轴套内径":"Φ35mm","静环材质":"不锈钢包硬质合金","动环材质":"不锈钢包硬质合金","弹簧材质":"不锈钢316L","密封圈材质":"氟橡胶.丁晴橡胶（耐酸碱）","工作压力":"4~10Mpa","工作温度":"15~80℃","使用寿命":"160天","参照标准":"GB/T 1134"} |
| 液压缸密封 | ZBD1611-80/45 | 10.00 | 套 | {"规格型号":"ZBD1611-80/45","材质":"聚氨酯，聚四氟乙烯，氟橡胶，丁腈橡胶，碳钢","工作介质":"煤油","特殊要求":"工作压力100bar，可以给厂家提供密封样品","使用寿命":"365天"} |
| 软连接 | K16S-63 | 6.00 | 个 | {"规格":"K16S-63","公称直径":"63","连接形式":"法兰","材质":"氟橡胶、法兰为铝","工作压力":"1.6MPA","介质":"煤油","使用寿命":"＞1年"} |
| 耐油管 | Ф12 | 200.00 | 米 | {"型号":"Ф12","材质":"橡胶","内径":"Φ12mm","外径":"Φ20mm","高度":"0mm","颜色":"黑色","使用介质":"液压油","工作压力":"2.0Mpa","参照标准":"GB/T 10544-2022"} |
| 喷淋阀膜片 | Φ36*3.5 | 62.00 | 个 | {"规格型号":"Φ36*3.5","内径":"Φ无mm","外径":"Φ36mm","长度":"无mm","材质":"氟橡胶","特殊要求":"硬度：75±5 shore A ;耐油耐腐蚀；工作温度10-80℃；使用寿命365T天","参照标准":"GB/T 30308-2013","备注":"喷淋阀膜片：外径36mm；厚度3.5mm；硬度要求75±5 shore A ;耐油耐腐蚀；工作温度10-80℃；使用寿命365天\n到货验收：到货后应完好无损，表面光洁无杂质，需附带出厂材质证明、检验报告及产品合格证，如果到货产品与技术要求不符或存在缺陷，供货商无条件更换或退货。退换货产生的一切费用由供货商承担。"} |
联系人3个
可引荐人脉698人
历史招中标信息20条
相似项目推荐